View TC74VHC153F07_4132651.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TC74VHC153F/FN/FT/FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74VHC153F,TC74VHC153FN,TC74VHC153FT,TC74VHC153FK
Dual 4-Channel Multiplexer
The TC74VHC153 is an advanced high speed CMOS DUAL 4-CHANNEL MULTIPLEXERs fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. Each of these data (1C0-1C3, 2C0-2C3) is selected by the two address inputs A and B. Separate strobe inputs ( 1G , 2G ) are provided for each of the two four-line sections. The strobe input ( G ) can be used to inhibit the data output; the output is fixed in low level while the strobe input is held high. An input protection circuit ensures that 0 to 5.5 V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5 V to 3 V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages.
Note: xxxFN (JEDEC SOP) is not available in Japan. TC74VHC153F
TC74VHC153FN
Features
* * * * * * * High speed: tpd = 5.0 ns (typ.) at VCC = 5 V Low power dissipation: ICC = 4 A (max) at Ta = 25C High noise immunity: VNIH = VNIL = 28% VCC (min) Power down protection is provided on all inputs. Balanced propagation delays: tpLH tpHL - Wide operating voltage range: VCC (opr) = 2 to 5.5 V Pin and function compatible with 74ALS153
TC74VHC153FT
TC74VHC153FK
Weight SOP16-P-300-1.27A SOL16-P-150-1.27 TSSOP16-P-0044-0.65A VSSOP16-P-0030-0.50
: 0.18 g (typ.) : 0.13 g (typ.) : 0.06 g (typ.) : 0.02 g (typ.)
1
2007-10-01
TC74VHC153F/FN/FT/FK
Pin Assignment IEC Logic Symbol
(14) (2) (1) (6) (5) (4) (3) (15) (10) (11) (12) (13) (9) 2Y
1G
1 2 3 4 5 6 7 8 (top view)
16 15 14 13 12 11 10 9
VCC
2G
A B 1G 1C0 1C1 1C2 1C3 2G 2C0 2C1 2C2 2C3
0 1 EN 0 1 2 3
G
0 3
B 1C3 1C2 1C1 1C0 1Y GND
A 2C3 2C2 2C1 2C0 2Y
MUX (7) 1Y
Truth Table
Select Inputs B A C0 Data Inputs C1 C2 C3 Strobe Output
G H L L L L L L L L
Y L L H L H L H L H
X L L L L H H H H
X L L H H L L H H
X L H X X X X X X
X X X L H X X X X
X X X X X L H X X
X X X X X X X L H
X: Don't care
2
2007-10-01
TC74VHC153F/FN/FT/FK
System Diagram
A 14 S0
S0
S1 S1 B 2 S2
S2
S3
S3
1C0
6 S0
7
1Y
1C1
5 S1
1C2
4 S2
1C3
3 S3
1G
1
2C0 2C1 2C2 2C3
10 11 12 13 15 Same as above block
9
2Y
2G
3
2007-10-01
TC74VHC153F/FN/FT/FK
Absolute Maximum Ratings (Note)
Characteristics Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current DC VCC/ground current Power dissipation Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Tstg Rating
-0.5 to 7.0 -0.5 to 7.0 -0.5 to VCC + 0.5 -20 20 25 50
Unit V V V mA mA mA mA mW C
180
-65 to 150
Note:
Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Operating Range (Note)
Characteristics Supply voltage Input voltage Output voltage Operating temperature Input rise and fall time Symbol VCC VIN VOUT Topr dt/dv Rating 2.0 to 5.5 0 to 5.5 0 to VCC
-40 to 85
Unit V V V C ns/V
0 to 100 (VCC = 3.3 0.3 V) 0 to 20 (VCC = 5 0.5 V)
Note :
The operating range must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND.
4
2007-10-01
TC74VHC153F/FN/FT/FK
Electrical Characteristics
DC Characteristics
Characteristics Symbol Test Condition VCC (V) High-level input voltage 2.0 VIH
Ta = 25C Min 1.50 VCC x 0.7

Ta = -40 to 85C Max

Unit
Typ.

Min 1.50 VCC x 0.7

Max

3.0 to 5.5 2.0
V
Low-level input voltage
0.50 VCC x 0.3

0.50 VCC x 0.3

VIL
3.0 to 5.5 2.0
V
1.9 2.9 4.4 2.58 3.94

2.0 3.0 4.5

1.9 2.9 4.4 2.48 3.80

IOH = -50 A High-level output voltage VOH VIN = VIH or VIL IOH = -4 mA IOH = -8 mA IOL = 50 A Low-level output voltage VOL VIN = VIH or VIL IOL = 4 mA IOL = 8 mA Input leakage current Quiescent supply current IIN ICC VIN = 5.5 V or GND VIN = VCC or GND
3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 5.5
V
0.0 0.0 0.0

0.1 0.1 0.1 0.36 0.36
0.1
0.1 0.1 0.1 0.44 0.44
1.0 A A
V
4.0
40.0
AC Characteristics (input: tr = tf = 3 ns)
Characteristics Symbol Test Condition VCC (V) Propagation delay time (Cn-Y) 3.3 0.3
Ta = 25C CL (pF) 15 50 15 50 15 50 15 50 15 50 15 50 Min

Ta = -40 to 85C Max 11.9 15.4 7.7 9.7 16.7 20.2 9.9 11.9 10.1 13.6 6.4 8.4 10
Unit
Typ. 7.7 10.2 5.0 6.5 10.8 13.3 6.8 8.3 6.3 8.8 4.4 5.9 4 20
Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0

Max 14.0 17.5 9.0 11.0 19.5 23.0 11.5 13.5 12.0 15.5 7.5 9.5 10
tpLH tpHL
ns
5.0 0.5
Propagation delay time (A, B-Y)
tpLH tpHL
3.3 0.3
ns
5.0 0.5
Propagation delay time ( G -Y) Input capacitance Power dissipation capacitance
tpLH tpHL
3.3 0.3
ns
5.0 0.5
CIN CPD
pF pF
(Note)
Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD*VCC*fIN + ICC
5
2007-10-01
TC74VHC153F/FN/FT/FK
Input Equivalent Circuit
INPUT
6
2007-10-01
TC74VHC153F/FN/FT/FK
Package Dimensions
Weight: 0.18 g (typ.)
7
2007-10-01
TC74VHC153F/FN/FT/FK
Package Dimensions (Note)
Note:
This package is not available in Japan.
Weight: 0.13 g (typ.)
8
2007-10-01
TC74VHC153F/FN/FT/FK
Package Dimensions
Weight: 0.06 g (typ.)
9
2007-10-01
TC74VHC153F/FN/FT/FK
Package Dimensions
Weight: 0.02 g (typ.)
10
2007-10-01
TC74VHC153F/FN/FT/FK
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN GENERAL
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
11
2007-10-01

▲Up To Search▲

Price & Availability of TC74VHC153F07

	To Download TC74VHC153F07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .